Notes for the printing industry

1. What should be paid attention to in the installation of the print head? Like what to pay attention to when installing accessories?

A: print head installation process hand can’t touch the surface of nozzle, can take an anti-static gloves to install shower nozzle, shower nozzle cable connected with the car control panel, pay attention to the positive and negative nozzle data line, first make clear how put, each corresponding to the last operation, again meet in doubt, don’t try to suggest to charge factory after-sales personnel thrust line diagram, in order to avoid burning nozzle thrust fault lines. After the completion of the circuit connection, it should be checked several times, such as four or five times, and the power should be turned on for running and printing test only after there is no problem.

When installing ink sac of a sprinkler head, insert it vertically and do not insert it diagonally to avoid plastic mouth of this sprinkler head

Turn off all power sources before installing or changing sprinkler lines.

Find the corresponding screwdriver to install the screw of the print head, to prevent the screw from coming down when changing the sprinkler head.

2. How long does it take to run out of ink without affecting the print?
3. Safety first, store ink away from fire and heat sources to prevent accidents.
4. It is better to keep a constant temperature in the ink warehouse, and the temperature difference in the printing workshop is not too great.
5. In some areas in the north, it is cold in winter, so it is necessary to avoid storing the ink outdoors to prevent the ink from gelling at low temperatures.

4, in the ink storage and management, should follow the principle of “first in, first out” that is, the ink bought first use, in case the ink due to storage time too long and affect the use effect.