1) Setup printer name and the ink channel The select printer name is Epson stylus photo R2000 and ink channel (normal is EP R200 4W4C) or you check the head carriage the ink damper order from left to right ink channel to select. 2) Print page editor and import image Here can set the print […]
Read MoreCoating spraying on the T-shirt with Pre-Coating Sprayer Pretreatment of coating spraying is necessary for printing on the dark T-shirt which can make white ink adhered onto the surface of the dark T-shirt. Here below are the important points: 1). the coating coming out from the sprayer should shape like nepheloid zone. 2). Spraying the […]
Read MoreToday WER-China gain to share a few tips- lets you easily remove clothes and hands ink stains, also give you some Suggestions at the same time, as far as possible to avoid the use of pictorial machine a big stick to the ink. For pictorial machine operators and we pictorial machine repair and maintenance of […]
Read More1, UV flatbed printers the printhead carriage stopped in the middle of drawing process Analysis: small carriage fault (grating signal read failure), servo board failure, PCI card failure Solution: replace the small plate/servo board/PCI card 2, UV flatbed printers stop supplying ink Analysis: the ink pump failure, float signal failure, filter clogging Solution: replace the […]
Read More1, UV flatbed printer droplets Analysis: inkjet dissipation, placement is wrong, mainly caused by dirt such as cable ageing, nozzle Solution: cleaning nozzle, replace the nozzle data line 2, UV flatbed printers printing size is wrong Analysis: step wrong, wrong image size or bezel-set Solution: adjust the appropriate step value, properly set image size or […]
Read More1, UV flatbed printer with double shadows Analysis: printhead without calibration Solution: good recalibrate printhead 2, UV flatbed printers no finish printing Analysis: software, image processing, the small carriage fault Solution: reshipment RIP software, reload the picture processing, change the small printhead carriage 3, UV flatbed printers print no inks Analysis: the failure of PCI […]
Read More1, UV flatbed printers can’t control machine after reinstall the software Failure phenomenon: open software, some control buttons lower limit, can’t control the machine Analysis: the software version is not corresponding with machine line version Solution: install the corresponding version control software 2, No ink printed by UV flatbed printer nozzle, spray without flash Analysis: […]
Read More1, UV flatbed printers ink carriage light flash, unable to reset the position Analysis: loose wiring, ink carriage fault, servo board ,USB cable fault solution: replug cable, replace the ink carriage/servo board/cable 2, UV flatbed printers can’t accept cloth Analysis: servo board failure, stepper drive failure solution: replace the servo board/step 3, UV flatbed printer […]
Read More
Recent Comments