The ink of the jet printer is very large. After a long time, the ink has an effect on the nozzle and the print image. The wear and ink stacking of the nozzle for a long time also affects the quality of the printed image. Therefore, the correct selection of ink and the correct maintenance of the nozzle is a problem that should not be ignored by the users of each painting machine.
So the user should first make the ink choice. The quality of the ink determines the quality of the printed image and also determines the service life of the nozzle. Inkjet ink is very complicated, whether it’s original or compatible ink. As long as it can meet the quality requirements of continuous printing. Therefore, for the ink jet printer, we can choose “cheap and fine” non-original quality ink.
The second is to do the maintenance of equipment and sprinkler head. The sprinkler head is most likely to be blocked by excessive printing time, improper use of ink, or long shelving. Of course, the use of poor quality ink will also cause the blockage of the hole to affect the printing quality, and even cause the entire nozzle to be scrapped. Although the manufacturing process of the sprinkler head is fine, its structure is not complicated. Direct contact with the print medium plane with many of the small round hole, connected to insert the cartridge nozzle, the nozzle spray from the nozzle to the hole and often stuck around the nozzle with adhesion between strong toner or impurities, just cleared these toners and impurities and nozzle can restore normal print function.
For the longtime stop use of the inkjet, it is best to use the inkjet system to clean the ink system after cleaning, to avoid the hole blockage. Most of the seemingly useless sprinklers are simply clogged with holes and can’t work, and can be restored with a simple rinse. For printing normal, but lack of stroke or color, or high-resolution image blurring of this kind of light jam, generally using the spray machine with the spray hole cleaning procedures can be solved. However, it should be noted that the cleaning procedure should be used to clean the holes when they are found to be lacking in stroke or color.