In English, “pass” means “pass”. Would you pass” pass” on the printing device?! I can say here, no. In spray printing industry, “pass” refers to the image forming need to print the number of times (cover a number of the unit area), the higher the pass number printed the slower speed, relative quality is better, […]
Read MoreThe unit production cost of digital printing is high, so there are not many printed products suitable for digital printing in the present situation. Based on practical experience, it is recommended to adopt digital printing technology in the following types of printing businesses, so as to achieve a balance between cost, speed and customer satisfaction. […]
Read MoreSeveral factors that make an ECO printer run stable : 1. The ECO printer needs to install a voltage stabilizer (220V/2500W): in some cases, the power supply of the card is not normal and the nozzle is damaged, which may also affect the image printing effect of the photo printer; 2. Connect the ground wire […]
Read MoreA. System power on and click touch screen power no response. Check : (1) use AVO meter to measure the main board F1 and F2 fuse if burn. (2) measure power board fuse if burn and replace a new one. (3) check main board all data cables and wire if connecting well or silvers damage. […]
Read More1. when sending a job to print the software comes no support the printer. Check: (1) check the printer driver if install. (2) check the printer setup if correct on RIP software. 2. when sending a job to print carriage move once then printer’s touch screen error icon flash red light. Check:(1)manual press left or […]
Read More1. Always hold the spray car in place during transportation, so that it can not slide freely. 2. When the machine doesn’t work must let spray car in situ spray flash flash spray (continuous time not more than three hours) or the nozzle moisturizing (nozzle to stop working, the time may not exceed 15 minutes […]
Read MoreUV printing technology because of its diversity is to advertising printing material, coating, and other industries to bring a revolution quietly. On a lot of transparent material, such as glass and acrylic board, a common printing technology is after UV color printing, add a layer of white coating on, bright-colored to line out of the […]
Read MoreThe ink of the jet printer is very large. After a long time, the ink has an effect on the nozzle and the print image. The wear and ink stacking of the nozzle for a long time also affects the quality of the printed image. Therefore, the correct selection of ink and the correct maintenance […]
Read MoreThe main distinguish between outdoor back glue and indoor back glue in the family the ink, the qualitative distinction is not big. An outdoor relative said coating material thicker, stronger UV radiation, the outdoor to drying performance better than indoor, but gush out than indoor beautiful picture. Compared with the outdoor lamination indoor back glue […]
Read More
Recent Comments